This is a US-made, factory-pattern 4-round magazine for Marlin bolt-action rifles chambered in .22 WMR or .17 HMR, finished in nickel. It's made from heat-treated steel with a steel follower and metal floor plate, and resists corrosion, scratches, and rust.
Fits these rifles
This magazine fits the following Marlin .22 WMR/.17 HMR bolt-action models:
- 882SS
- 982S
- 882
- 982
- 25MN
- 925M
- 782
- 25M
- 980
- 17V
- 917V
- 17VS
- 917VS
- XT-22WMR
Not sure which one you have? Confirm the model number stamped on the left side of the barrel before you order, or use the Marlin Magazine Fitment Guide.
This is a .22 WMR/.17 HMR magazine. It will not fit a Marlin .22 LR rifle, and a .22 LR magazine will not fit a rifle chambered in .22 WMR or .17 HMR. The two magazine families are not interchangeable.
Why the exact fit matters
A magazine that's close but not quite right causes the two most common magazine problems: rounds that don't feed cleanly, and a magazine that won't drop free or lock in place. Because this magazine is manufactured to the original Marlin factory pattern — not scaled or estimated from a generic blank — the feed lips, follower geometry, and latch dimensions match what your rifle was built around. That's the difference between a magazine that works every time and one that needs to be "worked in."
Specifications
| Spec | Detail |
|---|---|
| Caliber | 22 WMR / 17 HMR |
| Capacity | 4 Round |
| Finish | Nickel Plated |
| Material | Heat-treated steel, steel follower, metal floor plate |
| Manufacturer Part # | 71923 |
| Made in USA | Yes |
Why buy from American Rifle Magazines
- US-made — manufactured in the USA from US steel and US components, not an imported copy.
- Manufacturer-direct — you're ordering the factory-pattern magazine straight from the maker, not a reseller.
- In stock and ready to ship — from our shop in Connecticut.
Choosing the right one
Keep a spare on hand — it saves reload time in the field and reduces wear on your only magazine. If you want more rounds between reloads, the same fit is also available as a 7-round nickel magazine or a 10-round nickel magazine. Prefer black oxide? See the 4-round black oxide version.
Care and installation
Insert the magazine until the catch clicks and confirm it's seated before you chamber a round. Wipe down the exterior and follower periodically, especially after a wet range day or a hunt — even a corrosion-resistant finish benefits from basic upkeep. For a full rundown on cleaning and storing your magazines between seasons, see our Rifle & Magazine Care and Maintenance guide. If you still have questions about fit after checking the model number on your barrel, contact us and we'll help you match it.
Magazine capacity limits vary by state, and some states cap magazine capacity regardless of caliber. Before you order, check your state’s magazine capacity laws.
Frequently asked questions
How many rounds does this magazine hold?
This magazine holds 4 rounds of .22 WMR or .17 HMR.
Will this fit a Marlin .22 LR rifle?
No. This is a .22 WMR/.17 HMR magazine only. It will not fit a Marlin rifle chambered in .22 LR.
Which Marlin models does this magazine fit?
It fits Marlin bolt-action models 882SS, 982S, 882, 982, 25MN, 925M, 782, 25M, 980, 17V, 917V, 17VS, 917VS, and XT-22WMR. Confirm your model number on the left side of the barrel before ordering.
Nickel or black oxide — which should I pick?
Both are the same 4-round factory pattern. Nickel resists corrosion and wipes clean easily; black oxide gives a matte, factory-matching look.
Is this a genuine factory-pattern magazine?
Yes. It's manufactured in the USA to the original Marlin factory pattern from US steel and US components, not an imported copy.
Do you sell to dealers or in bulk?
Yes. See our wholesale purchasing page for terms.
Order yours today
Add this magazine to your cart and get your rifle back in the field. Every American Rifle Magazines order ships from our Connecticut shop, manufacturer-direct — no importer, no middleman.
Outfitting a range, shop, or FFL? See our wholesale purchasing terms. Browse the full Marlin .22 WMR/.17 HMR magazine collection, recheck fitment on the Marlin Magazine Fitment Guide, or see the 4-round black oxide version.