This is a US-made, factory-pattern 10-round .22 LR magazine for pre-1996 Marlin bolt-action and semi-automatic rifles, finished in nickel plating. It's in stock and ready to ship, and it includes a last-shot hold-open: the bolt stays open on the last round fired so you don't have to count shots.
Fits these rifles
This magazine is compatible with the following Marlin .22 LR models, plus the store-brand rifles Marlin built for other retailers:
- 25N, 25NC, 70, 70HC, 70L, 70P (Papoose), 70PSS, 793, 795, 880, 880SQ, 880SS, 917M2, 925, 980V, 989, 989M-2, 995, 995SS, 7000, 7000T, XT-22 LR, Model 2000
- Other brands: Big 5 700, Coast to Coast 42 and 440, WestPoint 701, Montgomery Ward 45
Not sure which one you have? Confirm the model number stamped on the left side of the barrel before you order, or use the Marlin Magazine Fitment Guide.
Own a Marlin 795? It takes a 7- or 10-round .22 LR magazine — this 10-round nickel version, the 10-round black oxide version, or the 7-round 71900 / 71901. All are legitimate factory options, not aftermarket substitutes.
This is a .22 LR magazine. It will not fit a Marlin rifle chambered in .22 WMR or .17 HMR, and a .22 WMR/.17 HMR magazine will not fit here. The two magazine families are not interchangeable.
Every part of this magazine — body, follower, spring, and floor plate — is made to the original Marlin dimensions, so it drops into the magazine well and feeds the way the factory magazine did. Nickel plating adds a bright, corrosion-resistant layer over the steel body, and it matches a nickel or stainless-look barrel. Feed geometry and spring tension are what decide whether a round chambers cleanly, which is why we build to the original pattern instead of a generic universal design.
Specifications
| Spec | Detail |
|---|---|
| Caliber | 22 LR |
| Capacity | 10 Round |
| Finish | Nickel Plated |
| Material | Steel |
| Manufacturer Part # | 71902 |
| Made in USA | Yes |
Why buy from American Rifle Magazines
- US-made — manufactured in the USA from US steel and US components, not an imported copy.
- Manufacturer-direct — you're ordering the factory-pattern magazine straight from the maker, not a reseller.
- In stock and ready to ship — from our shop in Connecticut, no backorder wait.
Choosing the right one
Same capacity, different finish: this magazine is nickel-plated to match a nickel or stainless-look barrel. If your rifle has a blued barrel, the 10-round black oxide version is the matching option. If 10 rounds is more than you need or more than your state allows, the 7-round 71901 nickel and 71900 black oxide fit the same rifles.
Magazine capacity limits vary by state. Before you order, check your state's magazine capacity laws.
Frequently asked questions
How many rounds does this magazine hold?
This magazine holds 10 rounds of .22 LR.
Which rifles does this magazine fit?
It fits pre-1996 Marlin 70-series semi-autos (including the 795 and Papoose 70P), plus the 25N, 880, 925, 989, and 995 bolt-action and semi-auto models, and the Big 5, Coast to Coast, WestPoint, and Montgomery Ward store-brand equivalents. Confirm your model number on the left side of the barrel before ordering.
What does the last-shot hold-open do?
When the last round fires, the bolt stays open instead of closing on an empty chamber, so you get a clear signal you're out without counting shots.
Does a Marlin 795 take a 7-round or a 10-round magazine?
Both are legitimate factory options for the 795. This is the 10-round nickel version; ARM also makes a 10-round black oxide version and 7-round versions in both finishes.
Is a 10-round magazine legal in my state?
Magazine capacity laws vary by state. Check your state's rules before ordering.
How do I keep this magazine feeding reliably?
Wipe the exterior down with a dry cloth after range use, check for dirt or powder residue in the feed lips, and avoid over-lubricating — a light coat is enough, since too much oil attracts grit. Inspect the feed lips and follower for bends or damage before you load it, and store it with the spring at rest rather than fully compressed for long periods.
Is this a genuine factory-pattern magazine?
Yes. It's manufactured in the USA to the original Marlin factory pattern from US steel and US components, not an imported copy.
Do you sell to dealers or in bulk?
Yes. See our wholesale purchasing page for terms.
Order yours today
This magazine is in stock and ready to ship — add it to your cart and get your Marlin back in the field.
Outfitting a range, shop, or FFL? See our wholesale purchasing terms. Browse the full .22 LR Marlin magazine collection, recheck fitment on the Marlin Magazine Fitment Guide, or see the 10-round black oxide version.