This is a US-made, factory-pattern 7-round magazine for Marlin bolt-action rifles chambered in .22 WMR or .17 HMR, finished in black oxide. It's built from rust-resistant, heat-treated steel with a steel follower and steel floor plate, using US-made steel and US-made components.
Fits these rifles
This magazine fits the following Marlin .22 WMR/.17 HMR bolt-action models:
- XT-22WMR
- XT-17 HMR
- 882SS
- 982S
- 882
- 982
- 25MN
- 925M
- 782
- 25M
- 980
- 17V
- 917V
- 17VS
- 917VS
Not sure which one you have? Confirm the model number stamped on the left side of the barrel before you order, or use the Marlin Magazine Fitment Guide.
This is a .22 WMR/.17 HMR magazine. It will not fit a Marlin .22 LR rifle, and a .22 LR magazine will not fit a rifle chambered in .22 WMR or .17 HMR. The two magazine families are not interchangeable.
Why the exact fit matters
A magazine that's close but not quite right causes the two most common magazine problems: rounds that don't feed cleanly, and a magazine that won't drop free or lock in place. Because this magazine is manufactured to the original Marlin factory pattern — not scaled or estimated from a generic blank — the feed lips, follower geometry, and latch dimensions match what your rifle was built around. That's the difference between a magazine that works every time and one that needs to be "worked in."
Specifications
| Spec | Detail |
|---|---|
| Caliber | 22 WMR / 17 HMR |
| Capacity | 7 Round |
| Finish | Black Oxide |
| Material | Heat-treated steel, steel follower, steel floor plate |
| Manufacturer Part # | 71920 |
| Made in USA | Yes |
Why buy from American Rifle Magazines
- US-made — manufactured in the USA from US steel and US components, not an imported copy.
- Manufacturer-direct — you're ordering the factory-pattern magazine straight from the maker, not a reseller.
- In stock and ready to ship — from our shop in Connecticut.
Choosing the right one
An OEM-pattern magazine like this one is made to exact manufacturer specifications, which means a snug fit and fewer misfeeds or jams than a generic replacement. If you want more capacity, the same fit is also available as a 10-round black oxide magazine. If you’d rather run nickel, see the 7-round nickel version.
Care and installation
Insert the magazine until the catch clicks and confirm it's seated before you chamber a round. Wipe down the exterior and follower periodically, especially after a wet range day or a hunt — even a corrosion-resistant finish benefits from basic upkeep. For a full rundown on cleaning and storing your magazines between seasons, see our Rifle & Magazine Care and Maintenance guide. If you still have questions about fit after checking the model number on your barrel, contact us and we'll help you match it.
Magazine capacity limits vary by state, and some states cap magazine capacity regardless of caliber. Before you order, check your state’s magazine capacity laws.
Frequently asked questions
How many rounds does this magazine hold?
This magazine holds 7 rounds of .22 WMR or .17 HMR.
Will this fit a Marlin .22 LR rifle?
No. This is a .22 WMR/.17 HMR magazine only — it will not fit a Marlin rifle chambered in .22 LR, and a .22 LR magazine will not fit here.
Which Marlin models does this magazine fit?
It fits Marlin bolt-action models XT-22WMR, XT-17 HMR, 882SS, 982S, 882, 982, 25MN, 925M, 782, 25M, 980, 17V, 917V, 17VS, and 917VS. Confirm your model number on the left side of the barrel before ordering.
Black oxide or nickel — which should I pick?
Both are the same 7-round factory pattern. Black oxide gives a matte, factory-matching look; nickel resists corrosion and cleans up easier. Pick whichever finish matches your rifle or your preference.
Is this a genuine factory-pattern magazine?
Yes. It's manufactured in the USA to the original Marlin factory pattern from US steel and US components, not an imported copy.
Do you sell to dealers or in bulk?
Yes. See our wholesale purchasing page for terms.
Order yours today
Add this magazine to your cart and get your rifle back in the field. Every American Rifle Magazines order ships from our Connecticut shop, manufacturer-direct — no importer, no middleman.
Outfitting a range, shop, or FFL? See our wholesale purchasing terms. Browse the full Marlin .22 WMR/.17 HMR magazine collection, recheck fitment on the Marlin Magazine Fitment Guide, or see the 7-round nickel version.